Supported Systems

Solsoft ChangeManager works with a multitude of network device types.

Access Control

Solsoft ChangeManager provides support for filtering rules, NAT configurations, anti-spoofing rules, device logging configurations, device access security. Among the supported devices are:

• Cisco IOS® and Juniper Routers
• Cisco Catalyst® switches with MSFC Cards
• IP-Filter
• IP-Firewall (BSD and Linux)
• Linux IP-Chains

Firewall

Solsoft ChangeManager supports stateful filtering rules, stateful filtering parameters, NAT configurations, anti-spoofing rules, device logging configurations, device access security and virtual firewalls.
 Among the supported devices are:

• Check Point™ VPN-1® NG (all platforms including Nokia IP and Nortel Alteon)
• Cisco IOS Firewall Feature Set
• Cisco ASA 5500 Series
• Cisco Firewall Service Module (FWSM)
• Cisco PIX® Firewall
• ISS Proventia M Series
• Linux NetFilter
• Juniper NetScreen (including deep packet inspection)
• Nortel Contivity Secure IP Services Gateway
• Symantec Enterprise Firewall
• SanMina Viking V Firewall

Virtual Private Network (VPN)

Solsoft ChangeManager provides support for VPN policies including complete configuration of IPSec VPN, GRE over IPsec where applicable, site-to-site VPN in fully-meshed network, hub & spoke network, partially-meshed network, heterogeneous IPsec network, client-to-gateway VPN. Support for IKE with pre-shared key, IKE with RSA-signature, NAT Traversal and Cisco DMVPN.
 Among the supported devices are:

• Check Point™ VPN-1NG (all platforms including Nokia IP and Nortel Alteon)
• Cisco IOS® and Juniper Routers
• Cisco ASA 5500 Series
• Cisco PIX Firewall
• Cisco VPN 3000 series concentrator
• Cisco VPN Service Module (VPNSM)
• Juniper NetScreen
• Nortel Contivity Secure IP Services Gateway

IPS

Solsoft ChangeManager supports IPS policies including configuration of traffic to be analyzed, security posture and signature update.
 Among the supported devices are:

• Cisco ASA 5500 Series
• ISS Proventia M Series

Cluster Support

Solsoft ChangeManager provides support for clustering design and parameter configuration.
 Among the supported devices are:

• Check Point FireWall-1® NG Cluster & Cluster XL
• Cisco IOS HRSP/GLBP & Cisco VPNSM HSRP/GLBP with IPSec HA/SSP Clusters